19 | 04 | 2021
Mylar Seal Kits PDF Print

Mylar Seal Kits

These gap seal kits from HansJorg Streifeneder include the seals, tape and instructions to seal all control surfaces (wings, rudder, elevator) on the glider.

I do not stock any Mylar or tape because of the limited shelf life for these products.  These kits are by pre-order only because of this and the specific requirements for each glider.  If you do not need the entire kit, I can get specific lengths of Mylar and rolls of tape.  Use the contact form in the menu to contact me for a quote.

The prices below are in Euro and do not include shipping from Germany to me and then from me to you.

Standard Mylar is the pre-curved Mylar - Combi Tape has the zig-zag turbulator cut into the leading edge of the Mylar.

 

Alexander Schleicher

 

ASK13 standard 150
ASW15 b standard 115
  with combi tape 120
ASW17 standard 350
  with combi tape 380
ASW19 + Pegase standard 155
  with combi tape 185
ASW20 standard 270
  with combi tape 295
ASW20L outboard wings only 20
ASK21 standard 165
  with combi tape 175
ASW22, ASW22B, ASH25 standard 425
ASW22BL standard 445
ASW22BLE standard 460
ASH25   25,6m standard 440
ASH25   26,0m standard 450
ASH25E standard 450
ASH25E 25,6m standard 455
ASH25E 26,0m standard 455
ASK23 standard 135
  with combi tape 140
ASW24 standard 150
  with combi tape 155
ASW24E standard 165
  with combi tape 170
ASH26 standard 345
ASW27 standard 290
ASW28 standard 170
ASW28-18 standard 290
ASW 28-18E standard 290
ASG 29, 15m standard 290
ASG 29, 18m standard 335
ASG 29 15m and 18m 395
ASG 29 E, 18m standard 400
ASG 29 E 15m and 18m 425
ASH 30 Mi standard 525
ASH 31 Mi 21m only 425
ASH 31 Mi 18m and 21m 485

   

Rolladen Schneider
LS1 , c, d (Pendelruder) standard 120
with combi tape 125
LS1 e, f standard 150
with combi tape 155
LS3 standard 270
with combi tape 295
LS3 a standard 265
with combi tape 295
LS3 17 standard 290
with combi tape 315
LS4 a, b standard 175
with combi tape 205
LS6 a,b standard 295
with combi tape 310
LS6 c, LS6 c 18, LS9 standard 340
with combi tape 360
LS7 standard 170
with combi tape 195
LS8 standard 195
LS8 vertical tail surfaces and elevator only 50
only vertical tail surfaces and elevator, with combi tape 75
LS8-18 vertical tail surfaces and elevator only 50
only vertical tail surfaces and elevator, with combi tape 75

 

Schempp Hirth

 

Cirrus standard 145
with combi tape at vertical tail surfaces only 155
Standard Cirrus, Cirrus 75 standard 135
with combi tape 140
Standard Cirrus, Cirrus 75 with pendulum elevator standard 115
Standard Cirrus, Cirrus 75 with pendulum elevator with combi tape 120
Mini Nimbus HS 7 standard 240
with combi tape 250
Mini Nmbus b, c standard 260
with combi tape 290
Discus standard 145
with combi tape 175
Discus 2 standard 155
with combi tape 185
Duo Discus standard 185
with combi tape 230
Duo Discus XL und XLT standard 290
with combi tape 330
Ventus a, b  15m standard 290
with combi tape at vertical tail surfaces only 320
GFS system* 360
Ventus a, b  16,6m standard 300
with combi tape at vertical tail surfaces only 330
GFS system* 380
GFS System & combi tape 380
Ventus c  17,6m standard 320
with combi tape at vertical tail surfaces only 340
GFS system* 390
Ventus 2 a, b standard 355
with combi tape 380
Ventus 2 c standard 415
with combi tape 440
Ventus 2 c M standard 420
with combi tape 445
Nimbus 2 standard 305
with combi tape at vertical tail surfaces only 315
Nimbus 2  b, c standard 330
with combi tape at vertical tail surfaces only 355
Nimbus 3 + 3D standard 445
with combi taped 470
GFS system* 545
Nimbus 4 standard 465
with combi tape 505
Janus a 18m mit Pendelleitwerk standard 285
with combi tape 295
Janus b 18m standard 315
with combi tape 335
Janus c 20m standard 340
with combi tape 365
Arcus standard 440
with combi tape 485
Arcus M standard 445
* Combi-Tape instead pre-bent mylar seals at underwings lower surface on wing (ask for more details)

 

 

 



DG-Flugzeugbau

 

DG100 standard 135
with combi tape 145
DG101 standard 145
with combi tape 150
DG200 standard 270
with combi tape 280
DG200/17, DG202,  DG400 standard 300
with combi tape 305
DG300 standard 150
with combi tape 155
DG500 / DG 505 with combi tape 190
 DG500 / DG 505 with wing tip 215
DG500-22 with combi tape 225
DG600 standard 195
with combi tape 205
DG600-18 standard 220
with combi tape 230
DG800-15 only vertical tail surfaces and elevator, without combi tape for wing 40
with combi tape 320
DG800-18 standard 40
with combi tape 400
DG 1000 standard 315

 

 

Glasflügel
 

 

Libelle H301  standard 190
with combi tape 215
Standard Libelle 201 standard 110
with combi tape 120
Kestrel standard 215
with combi tape 250
Kestrel 19 (slingsby) standard 230
with combi tape 265
Club Libelle und Hornet standard 190
with combi tape 215
Mosquito standard 260
with combi tape 285
Mosquito b standard 255
with combi tape 280
Glasflügel 304 standard 240
with combi tape and 3-D-Turbulator 250
Glasflügel 604 standard 260
with combi tape 300
BS1 standard 200
with combi tape at vertical tail surfaces only

210

 

 

 

Other gliders
Standard Astir, Astir 77, G102, Astir CS, Jeans Astir standard 170
with combi tape 205
Twin Astir, Twin 2 standard 205
with combi tape 225
Twin 3

with combi tape

230
Speed Astir standard 145
G 109 standard 200
Grob 109 b standard 210
SZD55 100
Elfe-S4A 130
Pik20 D + E standard 190
with combi tape 220
Pik20 B 260
Standard Jantar 100
Diamond Aircraft Dimona HK36 upper wing only 85
upper and lower wing, tailplane 145