21 | 09 | 2017
Franklin Canopy Cap PDF Print

Franklin Canopy Caps

 

These silver, reflective canopy covers are a stretch fit for your canopy and when stowed are much smaller than standard cotton covers.

The Franklin Canopy Caps also have an optional sun shield at the back of the cover for gliders with forward hinged canopies that are prone to damage from the parabolic focus effect of the canopy.  You may add this option to your cover for $20 US

All covers include a stowage bag and are priced as follows:

  • single-seat gliders - $109 US
  • two-seat gliders with one large canopy - $159 US
  • two-seat glider with two canopies - $175 US
  • add a sunshield $20 per canopy

Covers are available for these gliders:

Antares (Sun Shield option available)
Apis, Silent
ASH 26, ASH 31, JS1 Revelation (Sun Shield option available)
ASW 15
ASW 19, 20, Pegase (Sun Shield option available)
ASW 22 (Sun Shield option available)
ASW 24, 27, 28, ASG 29 (Sun Shield option available)
DG 101, 202, 300, 400, 600, 800 (Sun Shield option available)
Diana, Diana 2
Genesis 2
Grob G102 Astir CS
HPH 304 C&CZ, Mosquito 303, Hornet C (Sun Shield option available)
HPH 304S Shark (Sun Shield option available)
LAK-17, LAK-19 (Sun Shield option available)
Libelle H-201, H-301
LS1-f, 3, 4, 6, 7, 8, 10 (Sun Shield option available)
Nimbus 4, Quintus 
PIK 20
Pilatus B4
Schempp-Hirth A - Discus A, Discus 2A, Ventus A, Ventus 2A
Schempp-Hirth B - Discus, Discus 2, Ventus, Ventus 2, Nimbus 2, Nimbus 3, Mini Nimbus, Standard Cirrus
SZD-55 (Sun Shield option available)
SZD-48-3, SZD-59 Acro
ASH 25 (two place, two piece set - Sun Shield option available)
ASK 21 (two place, two piece set - Sun Shield option available)
DG-500, DG-505, DG-1000, DG-1001 (two place, two piece set)
Duo Discus XL, Arcus, Nimbus 4DL (two place, one large canopy)
Duo Discus, Duo Discus X, Janus C, Nimbus 3D, Nimbus 4D (two place, one large canopy)
Stemme S-10 (two place, one large canopy - Sun Shield standard)
 
Glider Covers PDF Print

Waterproof All-weather and Dust Covers

 kerry_asg29_covers kerry_wgc2012 cover 2

Kerry Covers are manufactured in China and are a high quality cover for your glider to protect it from dust, moisture and UV when tied down.  There are three levels of covers available

  • Dust covers - for indoor hangar use only - $750 US (15m - 18m) or $850 (20m)
  • All-weather covers - for use outdoors, waterproof - $900 US (15m - 18m) or $1000 (20m)
  • Reinforced covers - for exteneded outdoor use - $1000 US(15m - 18m) or $1100 (20m)

kerry_selevator kerry_selevator zipper kerry_selevator flag

 

kerry_swing cover kerry_swing cover flag

 

Patterns are availabe for almost all the common glider models from Schleicher, Schempp-Hirth, Jonkers, LS, DG, LAK, PZL

If a pattern is not available, it is still possible to create a new pattern by measuring specific dimensions of your glider and sending them to Kerry to manufacture covers for your glider.

 

Delivery time can be as little as one week for common glider models or 6-8 weeks if its not an in-stock model.

 
Mylar Seal Kits PDF Print

Mylar Seal Kits

These gap seal kits from HansJorg Streifeneder include the seals, tape and instructions to seal all control surfaces (wings, rudder, elevator) on the glider.

I do not stock any Mylar or tape because of the limited shelf life for these products.  These kits are by pre-order only because of this and the specific requirements for each glider.  If you do not need the entire kit, I can get specific lengths of Mylar and rolls of tape.  Use the contact form in the menu to contact me for a quote.

The prices below are in Euro and do not include shipping from Germany to me and then from me to you.

Standard Mylar is the pre-curved Mylar - Combi Tape has the zig-zag turbulator cut into the leading edge of the Mylar.

 

Alexander Schleicher
   
ASK13 standard 143
ASW15 standard 102
  with combi tape 111
ASW17 standard 327
  with combi tape 354
ASW19 + Pegase standard 135
  with combi tape 167
ASW20 standard 255
  with combi tape 282
ASW20L outboard wings only 18
ASK21 standard 150
  with combi tape 158
ASW22, ASW22B, ASH25 standard 407
ASW22BL standard 432
ASW22BLE standard 448
ASH25   25,6m standard 422
ASH25   26,0m standard 424
ASH25E standard 423
ASH25E 25,6m standard 436
ASH25E 26,0m standard 438
ASH25M 25,6m standard 423
ASH25M 26,0m standard 425
ASW24 standard 138
  with combi tape 146
ASH26 standard 341
ASW27 standard 269
ASW28 standard 150
ASW28-18 standard 206

 

Rolladen Schneider
LS1 c, d standard 101
with combi tape 108
LS1 e, f standard 130
with combi tape 136
LS3 standard 251
with combi tape 276
LS3 a standard 245
with combi tape 271
LS3 17 standard 269
with combi tape 297
LS4 a, b standard 129
with combi tape 156
LS6 a,b standard 270
with combi tape 291
LS6 c, LS6 c 18, standard 311
with combi tape 332
LS8 vertical tail surfaces and elevator only - internal seals on ailerons do not need Mylar 49
only vertical tail surfaces and elevator with combi tape 69
LS8-18 vertical tail surfaces and elevator only 49
only vertical tail surfaces and elevator, with combi tape

69




Schempp Hirth
Cirrus standard 137
with combi tape at vertical tail surfaces only 146
Standard Cirrus, Cirrus 75 standard 117
with combi tape 146
Mini Nimbus HS 7 standard 221
with combi tape 229
Mini Nmbus b, c standard 242
with combi tape 265
Discus standard 131
with combi tape 154
Discus 2 standard 141
with combi tape 165
Duo Discus standard 173
with combi tape 212
Ventus a, b  15m standard 267
with combi tape at vertical tail surfaces only 290
GFS system* 336
Ventus a, b  16,6m standard 285
with combi tape at vertical tail surfaces only 306
GFS system* 357
Ventus c  17,6m standard 296
with combi tape at vertical tail surfaces only 318
GFS system* 365
Ventus 2 a, b standard 317
with combi tape 339
Ventus 2 c standard 370
with combi tape 393
Nimbus 2 standard 288
with combi tape at vertical tail surfaces only 296
Nimbus 2  b, c standard 309
with combi tape at vertical tail surfaces only 332
Nimbus 3 + 3D standard 416
with combi taped 439
GFS system* 507
Nimbus 4 standard 436
with combi tape 473
Janus c 20m standard 315

with combi tape

338
* Uses Combi-Tape instead of pre-bent mylar seals on lower surface of wing (ask for more details)


DG-Flugzeugbau
DG100 standard 102
with combi tape 111
DG101 standard 131
with combi tape 138
DG200 standard 250
with combi tape 259
DG200/17, DG202,  DG400 standard 276
with combi tape 284
DG300 standard 139
with combi tape 148
DG500 / DG 505 standard 138
with combi tape 160
DG500-22 standard 168
with combi tape 190
DG600 standard 184
with combi tape 192
DG800-15 only vertical tail surfaces and elevator, without combi tape for wing 40
with combi tape 301
DG800-18 only vertical tail surfaces and elevator, without combi tape for wing 40
with combi tape 348

 

Glasfl├╝gel
 
Libelle H301  standard 175
with combi tape 198
Standard Libelle 201 standard 101
with combi tape 110
Kestrel standard 197
with combi tape 231
Kestrel 19 (Slingsby) standard 205
with combi tape and 3-D-Turbulator 239
Club Libelle and Hornet standard 175
with combi tape 197
Mosquito standard 242
with combi tape 265
Glasfl├╝gel 304 standard 225
with combi tape and 3-D-Turbulator 233

 

Other gliders
SZD55 91
Pik20 D + E standard 172
with combi tape 197
Pik20 B 244
Standard Jantar 91
Standard Astir, Astir 77, G102, Astir CS, Jeans Astir standard 156
with combi tape 190
Twin Astir, Twin 2 standard 187
with combi tape 195
 
Canopy Glove PDF Print

The Canopy Glove

Constructed from silver stretchy fabric, the canopy glove refelects the sunlight and keeps the cockpit cool.  This style of canopy cover is particulalry useful for LS series gliders or gliders with 2 piece canopies, such as early DG100/200 and Jantars that can not close properly using the SimplyKool cap style cover.

  

 

Price: $200

Cotton canopy covers are also available - please email me for a quote.

 
Instrument Tubing and Connectors PDF Print

Tygon Clear Tubing

 Please note, these items come from the US and the prices below do not include shipping from the suplpier to me.  I will do my best to minimize these shipping costs on your behalf!

3/16" ID x 5/16" OD tubing
1/4" ID x 3/8" OD tubing

$1.55 US / ft
$1.85 US / ft




  

   This is not the hard plastic tubing you find at the  harware store, it is the nice soft rubbery tubing.








Tubing T connectors


for 3/16' tubing
for 1/4" tubing

$0.55 US ea
$0.60 US ea


Tubing Straight Connectors

 

for 3/16' tubing
for 1/4" tubing

$0.30 US ea
$0.35 US ea

 
« StartPrev123NextEnd »

Page 1 of 3