06 | 05 | 2021
FuselageFlasher PDF Print

The Fuselage Flasher and Fusion Control and Power Box

 

          

 

The FuselageFlasher is a weatherproof externally mounted LED designed for low drag.  The best mounting option is on a gear door or engine bay door as it requires a 4 mm hole to allow the wires to pass through the fuselage to the LED.  The FuselageFlasher creates better visibility from above, below and behind depending upon the mounting location.  Combined with the CanopyFlasher it provides more all around visibility.

The FuselageFlasher can be connected with a CanopyFlasher via the Nexus box, or may be installed as a standalone strobe system that is powered and controlled with the Fusion box.

 

Four variants are available:

  • Fusion – connectable to Flarm (via Nexus) – add a CanopyFlasher / Nexus system separately.
  • Fusion LITE – stand-alone version, not connectable to Flarm or Nexus. Flashes continuously with 2-flashes per 1,5 second.
  • Fusion DUO – connects two FuselageFlashers to one single powerbox, connectable to Flarm via Nexus.
  • Fusion DUO LITE – stand-alone version, not connectable to Flarm or Nexus. Flashes continuously with 2-flashes per 1,5 second. Connects two FuselageFlashers to one single powerbox.

 

Read More ...

 

Prices: 

    • FuselageFlasher & Fusion LITE - stand-alone system: 315€
    • FuselageFlasher & Fusion - connectable to Nexus system: 330€

    • FuselageFlasher & Fusion & Nexus only: 455€

    • FuselageFlasher DUO & Fusion DUO LITE - stand-alone system (top and bottom LEDs): 580€

    • FuselageFlasher DUO & Fusion DUO - connectable to Nexus system: 620 €

    • FuselageFlasher DUO & Fusion DUO & Nexus only: 700 €

Included in the system:

  • 1x Fusion (LITE or standard) device.
  • 1 meter Red and Blue AWG18 wiring – for power supply of the Fusion.
  • 1x FuselageFlasher, with 3M double sided adhesive foam tape pre-applied.
  • 4 meter pre-attached AWG20 wiring (3 wires: red, red, black) – other lengths available on request.
  • (in case of Fusion LITE: 1 on/off switch is included).

Optionally:

  • Add Nexus only.
  • Data extension cable from Nexus to Fusion, 4m available.

NOT included:

  • Fuse/circuit breaker, 3A – available from us separately.
  • Silicone sealant/kit (for weather-proofing the FuselageFlasher).
  • Additional power cable.
  • Crimp or soldering tools.
  • Cable ties.